When sewing clothes, there is often a phenomenon that the clothes move back and forth, that is, one step forward and one step back

Source: Time:2018-09-20 14:02:48 frequency:

When sewing clothes, there is often a phenomenon that the clothes move back and forth, that is, one step forward and one step back. This is caused by the feeding teeth being too high, the plane of the teeth exposed to the needle plate is too high, and the teeth are always exposed outside the needle plate to reciprocate
When sewing clothes, there is often a phenomenon that the clothes move back and forth, that is, one step forward and one step back. This is caused by the feeding teeth being too high, the plane of the teeth exposed to the needle plate is too high, and the teeth are always exposed outside the needle plate to reciprocate, causing the cloth to move back and forth. During the adjustment, loosen the tooth-lifting crank screw, gently press down the tooth with a screwdriver to lower the feed tooth to the standard height, that is, the tooth is exposed to the size of the needle plate 0.8-1 mm, and then tighten the crank screw.
Product Center
Sewing equipment
Other accessories
About us
About us
cooperative partner
Corporate Style
News
News
Enterprise News
Common problem
contact us
contact us
Message
Tel:0769-83191528 Technical support: yijiantian network
Address: No.568, Shengping Middle Road, Yangwu village, Dalang Town, Dongguan City, Guangdong Province, China Record No:粤ICP备06017439号
official account